Read Microbrewed Adventures Online

Authors: Charles Papazian

Tags: #food

Microbrewed Adventures (34 page)

Mash/Extract Recipe
for 5 gallons (19 l)

2 lbs.: (908 g) 6-row pale malt

6 oz.: (168 g) home-toasted 6-row pale malt

6 oz.: (168 g) Munich malt

6 oz.: (168 g) Cara Pils malt

4 oz.: (113 g) crystal malt (20-L)

4 oz.: (113 g) chocolate malt

3 oz.: (84 g) black malt

6 lbs.: (2.7 kg) dark dried malt extract

1.25 oz.: (35 g) Brewers Gold hops 6% alpha (7.5 HBU/210 MBU)—60 minutes boiling

½ oz.: (14 g) Willamette hops 5% alpha (2.5 HBU/70 MBU)—20 minutes boiling

½ oz.: (14 g) Santiam hops—2 minutes boiling

¼ tsp.: (1 g) powdered Irish moss

German or Bavarian-type lager yeast

¾ cup: (175 ml measure) corn sugar (priming bottles) or 0.33 cups (80 ml) corn sugar for kegging

Spread 6 oz. of whole pale malt on a cookie sheet and toast in a moderate oven until you hear popping noises and smell the aroma of toasted malt. Do not toast to a dark brown. Cool this malt before crushing.

Heat 1 gallon (3.8 l) water to 172 degrees F (77.5 C) and then add crushed grains to the water. Stir well to distribute heat. Temperature should stabilize at about 155 degrees F (68 C). Wrap a towel around the pot and set aside for about 45 minutes. Have a homebrew.

After 30 minutes, add heat to the mini-mash and raise the temperature to 167 degrees F (75 C). Then pass the liquid and grains into a strainer and rinse with 170-degree F (77 C) water. Discard the grains.

Add more water to the sweet extract you have just produced, bringing the volume up to about 2.5 gallons (9.5 l). Add malt extract and 60-minute hops and bring to a boil.

The total boil time will be 60 minutes. When 20 minutes remain, add the 20-minute hops. When 10 minutes remain, add the Irish moss. When 2 minutes remain, add the 2-minute hops. After a total wort boil of 60 minutes, turn off the heat and place the pot (with cover on) in a running cold-water bath for 30 minutes. Continue to chill in the immersion or use other methods to chill your wort. Then strain and sparge the wort into a sanitized fermenter.
Bring the total volume to 5 gallons (19 l) with additional cold water if necessary. Aerate the wort very well.

Pitch the yeast when temperature of wort is about 70 degrees F (21 C). Once visible signs of fermentation are evident, ferment at about 55 degrees F (12.5 C) for about 1 week, or until fermentation shows signs of calm and stopping. Rack from your primary to a secondary fermenter and if you have the capability, “lager” the beer at temperatures between 35 and 45 degrees F (1.5–7 C) for 3 to 6 weeks.

Prime with sugar and bottle or keg when complete.

MASTERBREWERS CELEBRATION LIGHT LAGER

  • TARGET ORIGINAL GRAVITY: 1.046 (11.5 B)
  • APPROXIMATE FINAL GRAVITY: 1.008 (2 B)
  • IBU: ABOUT
    27
  • APPROXIMATE COLOR: 7 SRM (14 EBC)
  • ALCOHOL: 5% BY VOLUME

Mash/Extract Recipe
for 5 gallons (19 l)

2 lbs.: (908 g) 6-row pale malt

8 oz.: (225 g) home-toasted 6-row pale malt

8 oz.: (225 g) Cara Pils malt

4 lbs.: (1.82 kg) extra-light malt extract syrup

1.5 oz.: (42 g) Willamette hops 5% alpha (7.5 HBU/210 MBU)—60 minutes boiling

½ oz.: (14 g) Cascade hops—5 minutes boiling

¼ tsp.: (1 g) powdered Irish moss

German or Bavarian-type lager yeast

¾ cup (175 ml measure) corn sugar (priming bottles) or 0.33 cups (80 ml) corn sugar for kegging

Spread 8 oz. of whole pale malt on a cookie sheet and toast in a moderate oven until you hear popping noises and smell the aroma of toasted malt. Do not toast to a dark brown. Cool this malt before crushing.

Heat 3 quarts (3 l) water to 172 degrees F (77.5 C) and then add crushed grains to the water. Stir well to distribute heat. Temperature should stabilize at about 155 degrees F (68 C). Wrap a towel around the pot and set aside for about 45 minutes. Have a homebrew.

After 30 minutes, add heat to the mini-mash and raise the temperature to 167 degrees F (75 C). Then pass the liquid and grains into a strainer and rinse with 170-degree F (77 C) water. Discard the grains.

To the sweet extract you have just produced, add more water, bringing the volume up to about 2.5 gallons (9.5 l). Add malt extract and 60-minute hops and bring to a boil.

The total boil time will be 60 minutes. When 10 minutes remain, add the Irish moss. When 5 minutes remain, add the 5-minute hops. After a total wort boil of 60 minutes, turn off the heat and place the pot (with cover on) in a running cold-water bath for 30 minutes. Continue to chill in the immersion or use other methods to chill your wort. Then strain and sparge the wort into a sanitized fermenter. Bring the total volume to 5 gallons (19 l) with additional cold water if necessary. Aerate the wort very well.

Pitch the yeast when temperature of wort is about 70 degrees F (21 C). Once visible signs of fermentation are evident, ferment at about 55 degrees F (12.5 C) for about 1 week, or until fermentation shows signs of calm and stopping. Rack from your primary to a secondary fermenter and if you have the capability, “lager” the beer at temperatures between 35 and 45 degrees F (1.5–7 C) for 3 to 6 weeks.

Prime with sugar and bottle or keg when complete.

KLIBBETY JIBBIT

  • TARGET ORIGINAL GRAVITY: 1.046 (11.5 B)
  • APPROXIMATE FINAL GRAVITY: 1.010 (2.5 B)
  • IBU: ABOUT
    29
  • APPROXIMATE COLOR: 4 SRM (8 EBC)
  • ALCOHOL: 4.8% BY VOLUME

6 lbs.: (2.7 kg) 6-row pale malt

1.5 lbs.: (680 g) flaked corn

¾ oz.: (21 g) German Northern Brewers hops 8% alpha (6 HBU/168 MBU)—60 minutes boiling

1 oz.: (28 g) Czech Saaz hops 3% alpha (3 HBU/84 MBU)—20 minutes boiling

½ oz.: (14 g) German Hersbrucker-Hallertauer hops—2 minutes boiling

¼ oz.: (7 g) crystal hop pellets—dry hopping

¼ tsp.: (1 g) powdered Irish moss

Pilsener-type lager yeast

¾ cup: (175 ml measure) corn sugar (priming bottles) or 0.33 cups (80 ml) corn sugar for kegging

A step infusion mash is employed to mash the grains. Add 7.5 quarts (7.1 l) of 140-degree F (60 C) water to the crushed grain, stir, stabilize and hold the temperature at 132 degrees F (53 C) for 30 minutes. Add 3.75 quarts (3.6 l) of boiling water, add heat to bring temperature up to 155 degrees F (68 C) and hold for about 30 minutes. Then raise temperature to 167 degrees F (75C), lauter and sparge with 3.5 gallons (13.5 l) of 170-degree F (77 C) water. Collect about 5.5 gallons (21 l) of runoff. Add 60-minute hops and bring to a full and vigorous boil.

The total boil time will be 60 minutes. When 20 minutes remain, add the 20-minute hops. When 10 minutes remain, add the Irish moss. When 2 minutes remain, add the 2-minute hops. After a total wort boil of 60 minutes, turn off the heat and place the pot (with cover on) in a running cold-water bath for 30 minutes. Continue to chill in the immersion or use other methods to chill your wort. Then strain and sparge the wort into a sanitized fermenter. Bring the total volume to 5 gallons (19 l) with additional cold water if necessary. Aerate the wort very well.

Pitch the yeast when temperature of wort is about 70 degrees F (21 C). Once visible signs of fermentation are evident, ferment at about 55 degrees F (12.5 C) for about 1 week, or until fermentation shows signs of calm and stopping. Rack from your primary to a secondary fermenter and add the hop pellets for dry hopping. If you have the capability, “lager” the beer at temperatures between 35 and 45 degrees F (1.5–7 C) for 4 to 8 weeks.

Prime with sugar and bottle or keg when complete.

Mash/Extract Recipe
for 5 gallons (19 l)

2.5 lbs.: (1.15 kg) light malt extract syrup or 2 lbs. (0.9 kg) light dried malt extract

3 lbs.: (1.36 kg) 6-row pale malt

1.5 lbs.: (680 g) flaked corn

1 oz.: (28 g) German Northern Brewers hops 8% alpha (8 HBU/224 MBU)—60 minutes boiling

1 oz.: (28 g) Czech Saaz hops 3% alpha (3 HBU/84 MBU)—20 minutes boiling

½ oz.: (14 g) German Hersbrucker-Hallertauer hops—2 minutes boiling

¼ oz.: (7 g) crystal hop pellets—dry hopping

¼ tsp.: (1 g) powdered Irish moss

Pilsener-type lager yeast

¾ cup: (175 ml measure) corn sugar (priming bottles) or 0.33 cups (80 ml) corn sugar for kegging

Heat 1.5 gallons (5.7 l) water to 172 degrees F (77.5 C) and then add crushed grains to the water. Stir well to distribute heat. Temperature should stabilize at about 155 degrees F (68 C). Wrap a towel around the pot and set aside for about 45 minutes. Have a homebrew.

After 45 minutes, add heat to the mini-mash and raise the temperature to 167 degrees F (75 C). Then pass the liquid and grains into a strainer and rinse with 170-degree F (77 C) water. Discard the grains.

To the sweet extract you have just produced, add more water, bringing the volume up to about 2.5 gallons (9.5 l). Add malt extract and 60-minute hops and bring to a boil.

The total boil time will be 60 minutes. When 20 minutes remain, add the 20-minute hops. When 10 minutes remain, add the Irish moss. When 2 minutes remain, add the 2-minute hops. After a total wort boil of 60 minutes, turn off the heat.

Immerse the covered pot of wort in a cold-water bath and let sit for 30 minutes, or the time it takes to have a couple of homebrews.

Then strain out and sparge hops and direct the hot wort into a sanitized fermenter to which 2.5 gallons (9.5 l) of cold water has been added. Bring the total volume to 5 gallons (19 l) with additional cold water if necessary. Aerate the wort very well.

Pitch the yeast when temperature of wort is about 70 degrees F (21 C).
Once visible signs of fermentation are evident, ferment at about 55 degrees F (12.5 C) for about 1 week, or until fermentation shows signs of calm and stopping. Rack from your primary to a secondary fermenter and add the hop pellets for dry hopping. If you have the capability, “lager” the beer at temperatures between 35 and 45 degrees F (1.5–7 C) for 4 to 8 weeks.

Prime with sugar and bottle or keg when complete.

MILE-HIGH GREEN CHILE ALE

  • TARGET ORIGINAL GRAVITY: 1.051 (12.6 B)
  • APPROXIMATE FINAL GRAVITY: 1.012 (3 B)
  • IBU: ABOUT
    35
  • APPROXIMATE COLOR: 9 SRM (18 EBC)
  • ALCOHOL: 5.1% BY VOLUME

All-Grain Recipe
for 5 gallons (19 l)

7.5 lbs.: (3.4 kg) pale malt

1 lb.: (454 g) crystal malt (20-L)

½ oz.: (14 g) UK Kent Goldings hops 7% alpha (3.5 HBU/98 MBU)—60 minutes boiling

½ oz.: (14 g) UK Fuggles hops 5% alpha (2.5 HBU/70 MBU)—60 minutes boiling

¾ oz.: (21 g) UK Kent Goldings hops 7% alpha (5.3 HBU/147 MBU)—20 minutes boiling

½ oz.: (14 g) UK Fuggles hops 5% alpha (2.5 HBU/70 MBU)—20 minutes boiling

1 lb.: (454 g) fire-roasted green Anaheim or Santa Fe green chilies with skins

¼ tsp.: (1 g) powdered Irish moss

American-type ale yeast

¾ cup: (175 ml measure) corn sugar (priming bottles) or 0.33 cups (80 ml) corn sugar for kegging

A step infusion mash is employed to mash the grains. Add 8.5 quarts (8.1 l) of 140-degree F (60 C) water to the crushed grain, stir, stabilize and hold the tem
perature at 132 degrees F (53 C) for 30 minutes. Add 4 quarts (3.8 l) of boiling water, add heat to bring temperature up to 155 degrees F (68 C) and hold for about 30 minutes. Then raise temperature to 167 degrees F (75 C), lauter and sparge with 3.5 gallons (13.5 l) of 170-degree F (77 C) water. Collect about 5.5 gallons (21 l) of runoff. Add 60-minute hops and bring to a full and vigorous boil.

The total boil time will be 60 minutes. When 20 minutes remain, add the 20-minute hops. When 10 minutes remain, add the Irish moss. After a total wort boil of 60 minutes, turn off the heat and place the pot (with cover on) in a running cold-water bath for 30 minutes. Continue to chill in the immersion or use other methods to chill your wort. Then strain and sparge the wort into a sanitized fermenter. Bring the total volume to 5 gallons (19 l) with additional cold water if necessary. Aerate the wort very well.

Pitch the yeast when temperature of wort is about 70 degrees F (21 C). Ferment at about 70 degrees F (21 C) for about 1 week, or until fermentation shows signs of calm and stopping. Rack from your primary to a secondary fermenter and add chopped roasted chilies. If you have the capability, “cellar” the beer at about 55 degrees F (12.5 C) for about 1 week.

Prime with sugar and bottle or keg when complete.

Malt Extract Recipe
for 5 gallons (19 l)

6.25 lbs.: (2.8 kg) light malt extract syrup or 5 lbs. (2.3 kg) light dried malt extract

1 lb.: (454 g) crystal malt (20-L)

½ oz.: (14 g) UK Kent Goldings hops 7% alpha (3.5 HBU/98 MBU)—60 minutes boiling

1 oz.: (28 g) UK Fuggles hops 5% alpha (5 HBU/140 MBU)—60 minutes boiling

¾ oz.: (21 g) UK Kent Goldings hops 7% alpha (5.3 HBU/147 MBU)—20 minutes boiling

½ oz.: (14 g) UK Fuggles hops 5% alpha (2.5 HBU/70 MBU)—20 minutes boiling

1 lb.: (454 g) fire-roasted green Anaheim or Santa Fe chilies with skins

¼ tsp.: (1 g) powdered Irish moss

American-type ale yeast

¾ cup: (175 ml measure) corn sugar (priming bottles) or 0.33 cups (80 ml) corn sugar for kegging

Place crushed grains in 2 gallons (7.6 l) of 150-degree F (68 C) water and let steep for 30 minutes. Then strain out (and rinse with 3 quarts [3 l] hot water) and discard the crushed grains, reserving the approximately 2.5 gallons (9.5 l) of liquid to which you will now add malt extract and 60-minute hops. Bring to a boil.

The total boil time will be 60 minutes. When 20 minutes remain, add the 20-minute hops. When 10 minutes remain, add the Irish moss. After a total wort boil of 60 minutes, turn off the heat.

Other books

New Forever by Yessi Smith
Murder Talks Turkey by Deb Baker
West of Nowhere by KG MacGregor
Another Woman's Man by Shelly Ellis
Shiloh Season by Phyllis Reynolds Naylor
A Cupboard Full of Coats by Yvvette Edwards
La niña de nieve by Eowyn Ivey


readsbookonline.com Copyright 2016 - 2024